Most major manufacturers have part numbers which are specific to their products. These are designed to fit their products exactly. We would recommend to use these wherever possible to ensure compatibility.
These can be found on the spares listings on our website. For advice on how to find or identify your shower or part, see our article: How to find/identify your Shower or Part?
However, there are occasions though where you may need something generic, for example, to fit a product which is not from a major manufacturer. If you are a tradesperson, you will inevitably come across this scenario at some point. Having a box of these spares can be a real asset and can save you a lot of time hunting for non-existent or hard to find parts.
We are pleased to stock a range of universal spares boxes from Inventive Creations to cater for this eventuality.
60 piece o'ring box
Product code: BOX A
Contains:
20 of 2.4 x 11.1 x 15.9
5 of 1.6 x 9.5 x 12.7
5 of 2.4 x 12.7 x 17.5
5 of 2.4 x 17.5 x 22.5
5 of 20.6 x 27
5 of 1.5 x 6.4 x 9.5
5 of 2.4 x 9.5 x 14.3
5 of 2.4 x 14.3 x 19.1
5 of 3.1 x 19.1 x 25.4
55 piece fibre washer box
Product code: BOX B
Contains:
10 of 10 x 20 x 1.2
10 of 13 x 19 x 1.2
10 of 19 x 24 x 1.2
5 of 28 x 19 x 1.2
5 of 16 x 22 x 1.2
10 of 15 x 18 x 1.2
5 of 24 x 28 x 1.2
225 piece o'ring box
Product code: BOX C
Contains:
20 of 3.0 x 1.0
20 of 4.0 x 1.0
20 of 4.5 x 2.0
20 of 5.0 x 2.0
20 of 6.0 x 2.0
20 of 6.0 x 2.5
20 of 6.0 x 3.0
20 of 7.0 x 2.0
20 of 8.0 x 2.0
5 of 9.0 x 2.0
5 of 10.0 x 2.0
5 of 12.0 x 3.0
5 of 13.0 x 3.0
5 of 14.0 x 2.5
5 of 17.0 x 2.5
5 of 18.0 x 4.0
5 of 20.0 x 2.0
5 of 22.0 x 2.0
175 piece fibre & rubber washer set
Product code: BOX D
Contains:
Fibre Washers:
8 of 4 x 15 x 2
15 of 24 x 29 x 1.2
5 of 16 x 22 x 1.2
15 of 13 x 19 x 0.9
5 of 28 x 32 x 1.2
25 of 14 x18 x 1.2
5 of 32 x 38 x 1.2
18 of 19 x 24 x1.2
10 of 10 x 20 1.2
Rubber Washers:
10 of 3 x 1.4 x 2.6
18 of 10 x 19 x 1.8
13 of 12 x 24 x 19
14 of 14 x 24 x 1.6
419 piece o'ring assortment
Product code: BOX E
Universal 1/2" tap valve spares multi-box
Product code: CBOX1 (TB)
This box contains a selection of the most popular 1/2" tap mechanisms used in the UK.
Universal 3/4" tap valve spares CL complete box set
Product code: CLBOX
Standard 3/4" thread into tap.
Box contains:
Spline code CL1 x 2 pairs
Spline code CL3 x 2 pairs
Spline code CL4 x 2 pairs
Spline code CL4-1 x 2 pairs
Spline code CL9 x 2 pairs
Spline code CL9-1 x 2 pairs
Spline code CL11 x 2 pairs
Spline code CL16 x 2 pairs
Spline code CL17 x 2 pairs
Brass screws x 10
These tap cartridges can also be purchased as pairs here.
A useful tool is also the Tap cartridge spline finder gauge (SF)
Universal monobloc mixer tap cartridge - complete box set (M1 - M9)
Product code: MB
Box set contains:
M1 cartridge x 2
M2 cartridge x 2
M3 cartridge x 2
M4 cartridge x 2
M5 cartridge x 2
M6 cartridge x 2
M7 cartridge x 2
M8 cartridge x 2
M9 cartridge x 2
CC15-1 cartridge x 2
For practical supplies please see our Bigger and better Practical Supplies range!
For help and advice please get in touch here.